Illig Thermoforming Machines
RDM Machine Lines
The RDM-K machines equipped with forming/punching technology stand for precise mechanical drives, high product quality, performance and reliability. The user can select from a comprehensive, product-oriented series with various forming areas and equipment levels.
The forming device with the cam-controlled toggle lever system ensures high forming and punching forces. The forming table in K-machines tilts in the feed direction through an angle of 80° after forming. From this position the ejectors push the cups into the stacking device. The tilting movement permits controlled ejecting and stacking of products even in multi-row tools.
3rd Generation thermoformers and tools feature considerably higher cycle speeds as well as an optimized and accelerated forming process which results in clearly improved part quality.
Over 60% Market Share Worldwide
"Inventor of the Tilting Mould Technology"
RDM Series
Automatic Roll-Fed Forming/Punching Machine
Pressure Forming Machine
RDM 54K
Forming area up to depth of draw 125 | max. | 520 x 300 | mm
Forming area as of depth of draw 126 | max. | 520 x 260 | mm
Height of formed part negative | max. | 125/150 | mm
Height of formed part positive | max. | 15 | mm
Material width | max. | 545 | mm
Index length | max. | 350 | mm
Mold closing force | max. | 230 | kN
No-load speed | | 56 | min-1
RDM 70K
Forming area up to depth of draw 125 | max. | 680 x 300 | mm
Forming area as of depth of draw 126 | max. | 680 x 260 | mm
Height of formed part negative | max. | 125/150 | mm
Height of formed part positive | max. | 15 | mm
Material width | max. | 730 | mm
Index length | max. | 350 | mm
Mold closing foce | max. | 320 | kN
No-load speed | | 51 | min-1
RDM 75K
Forming area depth of draw 150 | max. | 735 x 465 | mm
Height of formed part negative | max. | 150 | mm
Height of formed part positive | max. | 15 | mm
Material width | max. | 800 | mm
Index length | max. | 480 | mm
Mold closing force | max. | 600 | kN
No-load speed | | 42 | min-1
RDM 76K
Forming area up to depth of draw 125 | max. | 760 x 540 | mm
Material thickness | max. | 1,5 | mm
Height of formed part negative | max. | 150 | mm
Height of formed part positive | max. | 15 | mm
Material width | max. | 850 | mm
Index length | max. | 565 | mm
Mold closing foce | max. | 600 | kN
No-load speed | | 38 | min-1
Presenting Patented T-IML
Cup decoration by means of ILLIG IML system (in-mold labeling system) by inserting pre-printed labels from magazines directly into the forming tool.
RDM Series Video
Content from Youtube can't be displayed due to your current cookie settings. To show this content, please click "Consent & Show" to confirm that necessary data will be transferred to Youtube to enable this service. Further information can be found in our Privacy Policy. Changed your mind? You can revoke your consent at any time via your cookie settings.
