Form Fill Seal Lines

Economical thermoforming with FS 37 form, fill and seal line. Whether 20 g portion pack or 500 g curd, there is almost no economical alternative to thermoformed plastic packs.
FFS lines, such as model FS 37, are very suited for this purpose. With format layouts between 10 and 32 packs (subject to pack size) per machine cycle, an hourly performance between 10 000 and 60 000 packs is achieved.
The FS 37 is of modular design providing many equipment variants for individual adaptation to customers' requirements. ILLIG form, fill and seal lines have stood the test in an excellent way and provide the necessary reliability to the user so he can always deliver reliably and in time.
The form, fill and seal line is equipped with a max. forming area of 375 x 350 mm.

FS 37

• Material width | max. | 375 | mm
• Feed length | max. | 350 | mm
• Depth of draw | max. | 95 | mm
• Working speed, subject to format | max. | 30 | cycles/min
• Machine weight |  | 4,500-6,000 | kg

With ILLIG‘s FLS 48 In-Mold labeling station 1, 2, 3, 4 or 5 areas can be labeled. At the same time up to 8 different flavors can be filled and decorated differently. In contrary to conventional banding no vertical walls are required for this. The IML module for impressive decoration of thermoformed cups works with printed blanks from the magazine. Go-ahead for eye-catching, dynamic marketing ideas.

Most Materials can be Processed Thanks to Multiple Contact Heating
The heating requirement can be individually controlled thanks to format-milled and Teflon-coated contact heating plates with individual zone control and gradual heating up.
Thus most conventional materials can be processed: PS, PS-multilayer (such as PS/EVOH/PE), PP-multilayer (such as PP/EVOH/PP) as well as APET, even materials made of PLA (polylactic acid) biopolymer. Exact temperature control
due to cast-in heating elements. Same conditions apply to lid materials in heat sealing method. The hinged multiple-zone contact heater is easily accessible
for cleaning and maintenance.

Servo Motors Featuring High Running Smoothness
All stations of the process chain are equipped with state-of-the-art, energy-efficient servo motors. The entire motion sequencing is very quite and happens with maximum working speed at the same time with no product overspilling at all. Subject to material used, over 30 cycle per minute can be achieved. With optimum format layout and plastic packs adjusted to product, up to 60 000 packs can be produced per hour. The discharge system can be adjusted to any pack shape: round, oval, rectangular or asymmetrical. The thermoformer‘s
format area of 480 mm x 320 mm (without decoration up to 350

More Options in Label Design
Label materials can be combined with cup materials without effort, e.g. PP labels on PP, PS labels on PS, paper labels on PP, PS (without additional adhesives) or APET. ILLIG IML System Technology - for impressive appearance of your premium products on the shelves.

Different Cup Heights. No Problem

By maintaining punching and sealing dimensions, ILLIG lines produce different cup heights (e.g. 100 g, 250 g or 500 g). Only the drawer equipped with cavities must be changed.